CK61 Handheld Computer User's Manual With Windows CE
16 Tap OK.
Configuring LEAP Security With Profile Wizard
LEAP is the Cisco Lightweight version of EAP.
To configure LEAP security
1 In the Profile Wizard, select the Security page.
2 For 802.1x Security, choose LEAP.
3 For Association, choose Open, WPA, WPA2, or Network EAP.
4 For Encryption, choose TKIP or AES if you selected WPA2 for
association, or WEP if you selected Network EAP for association.
5 For Username, type a unique username for this protocol.
6 In the Password field, type a unique password for this protocol.
7 Select Prompt for password to have the user enter this password
each time to access the protocol, or select Use following password
to use the protocol without entering a password each time you use
the CK61.
8 Tap OK.
Configuring EAP-FAST with Profile Wizard
The EAP-FAST protocol is a client-server security architecture that
encrypts EAP transactions with a TLS tunnel. While similar to PEAP,
EAP-FAST differs significantly since tunnel establishment is based on
strong secrets unique to users. These secrets are called Protected
Access Credentials (PACs), which CiscoSecure ACS generates using a
master key known only to CicsoSecure ACS. EAP-FAST does not
require certificate management.
To configure EAP-FAST security
1 In the Profile Wizard, select the Security page.
2 For 802.1x Security, choose EAP-FAST.
3 For Association, choose Open, WPA, WPA2, or Network EAP.
4 For Encryption, choose WEP if you selected Network EAP for
association.
5 For Username, type a unique username for this protocol.
6 In the Password field, type a unique password for this protocol.
Chapter 2 — Connecting and Configuring the CK61
55