Intermec CK61 User Manual page 69

CK61 Handheld Computer User's Manual With Windows CE
To select Microsoft security as your security choice
1 Tap the Windows icon > Settings > Control Panel > the
Intermec Settings icon. The Intermec Settings application
appears.
2 Select Communications > 802.11 Radio > Security Choice.
3 From the Security Choice list, select Microsoft Security and save
your settings. An alert box appears telling you that you must save
your settings and warm boot the CK61 for the new security choice
to take effect.
4 Tap Yes. The CK61 resets and starts with Microsoft Security as the
Security Choice.
Networks already configured are preferred networks. You can connect
to only preferred networks or search for and connect to any available
network.
You can add a wireless network when the network is detected or
manually by entering settings information. To determine if
authentication information is needed, see your network
administrator.
When the CK61 restarts with Microsoft selected as the security choice,
a dialog box with your wireless network information appears. You can
connect to an existing preferred connection or set up a new
connection. The following information is for setting up a new
connection.
To configure Microsoft security for a new connection
1 In the radio network connection dialog box, double-tap Add New.
2 Enter a Network name. If the network was detected, the network
name is entered and cannot be changed.
3 (Optional) To connect to an ad-hoc connection, select This is a
device-to-device (ad-hoc) connection.
4 Follow these steps to disable authentication:
a Set Authentication to Open if WEP keys are not required or to
Shared when WEP keys are required for association.
b Set Data Encryption to Disabled.
Follow these steps to enable WEP encryption:
Chapter 2 — Connecting and Configuring the CK61
57