CK61 Mobile Computer User's Manual With Windows CE
You can corrupt your SD card if you do not follow these
installation and removal procedures exactly. Before installing a
SD card, inspect the gasket on the door for any damage or wear,
and contact your Intermec representative if you find any damage
or wear.
To insert the SD card
1 Press the Power button to turn off the CK61.
2 Remove the two screws that secure the stylus holder to the CK61.
3 Insert the SD card into the CK61 with the printed side facing the
keypad of the CK61.
4 Push the card into the slot until it latches into place.
5 Screw in the stylus holder that you removed in Step 2.
Note: Do not over torque the stylus holder onto the CK61. You can
damage the CK61.
Chapter 1 — Using the CK61 Mobile Computer
Screw
(2 places)
17