Intermec CK61 User Manual page 61

CK61 Handheld Computer User's Manual With Windows CE
7 For Authentication, choose TTLS, PEAP, or TLS.
If you choose TTLS or PEAP:
a Select User name and type your user name.
b Select Password prompt, and choose Enter password now.
Note: You can use Prompt for password to troubleshoot your
connection to the network if you have problems.
c Select User Password and type a user password.
d For Validate Server Certificate, choose Enabled.
If you choose TLS:
a Load a user and root certificate on your CK61.
b For Validate Server Certificate, choose Yes.
c You must enter a User Name and Subject Name. You can also
enter a Server Common Name if you want to increase your
level of security.
d Save and exit Intermec Settings.
Configuring LEAP Security on the CK61
1 Make sure you have selected Funk as your security choice.
2 Make sure you have configured the communications and radio
parameters on your CK61.
3 From Intermec Settings, choose Communications > 802.11 Radio
> Funk Security > Profile.
4 For 802.1x, choose LEAP.
5 For Association, choose Open, WPA, WPA2, or Network EAP.
Encryption automatically defaults to TKIP if you choose WPA, to
AES if you choose WPA2, and to WEP if you choose Open or
Network EAP.
6 For Prompt for Credentials, choose Enter credentials now.
7 Select User name and type your user name.
8 Select User Password and type a user password.
Chapter 2 — Connecting and Configuring the CK61
49