Intermec CK61 User Manual page 50

Chapter 2 — Connecting and Configuring the CK61
38
Understanding the ISpyWiFi Tab (continued)
Setting Description
ESSID The text SSID for your network.
BSSID The MAC address of the access point that the client radio is
communicating with.
Association Shows the type of association: Open, WPA, WPA-PSK, WPA2,
or Network EAP.
Encrypt Shows the potential encryption for the association.
Power CAM (Constant Awake Mode) or FAST PSP (Power Save Poll)
Antenna Diversity (multiple antennas), Primary (one antenna).
TX Power Transmit power level in milliwatts (mW).
RSSI The Received Signal Strength Indicator. The closer to zero,
the better for this indicator.
Link The data rate at which the radios are communicating.
Use the WiFi Scan tab to scan your network and bring back
information about any access points with which you can
communicate.
To use the WiFi Scan tab
1 Tap the WiFi Scan tab.
2 Tap the Scan button.
3 Tap any of the columns to sort in ascending or descending order.
Use the Supplicant tab to view information on security and
authentication settings that you have configured on the CK61.
To use the Supplicant tab
• Click Configure Profile to launch the Profile Wizard and
configure 802.11 options.
• Click Reconnect to disassociate the radio, momentarily dropping
its connection. The radio the reassociates and reauthenticates, but
does not do anything with the driver.
• Click Clear Events to remove the information shown in the
Supplicant Event box.
Use the Ping tab to contact with any host in your network for
information.
CK61 Handheld Computer User's Manual With Windows CE