Intermec CK61 User Manual page 47

CK61 Handheld Computer User's Manual With Windows CE
The next sections explain the parameters you need to configure for
the CK61 to work in your wireless network.
Configuring the Network Parameters for a TCP/IP Network
In a TCP/IP network, the CK61 communicates with a host computer
directly using TCP/IP. The access point acts as a bridge to allow
communications between the wired network and the wireless
network.
To use wireless communications in a TCP/IP network
1 Tap the Windows icon > Settings > Control Panel > the
Intermec Settings icon.
2 Configure these network parameters on each CK61 in the
network:
• Network name (SSID)
• IP settings (if not using DHCP)
3 Make sure the CK61 is talking to the network and that the
network can see the CK61.
4 Configure security. For help
CK61" on page
The easiest way to configure the network parameters on the CK61 is
to use Intermec Settings. For help, see
Intermec Settings" on page
Configuring the Network Parameters for a UDP Plus Network
In a UDP Plus network, the CK61communicates with a host
computer through the Intermec Application Server. The Intermec
Application Server translates UDP Plus packets on the wireless
network into TCP/IP packets on the wired networks and vice versa.
The access point acts as a bridge to allow communications between
the wired network and the wireless network.
To use wireless communications in a UDP Plus network
1 Tap the Windows icon > Settings > Control Panel > the
Intermec Settings icon.
2 Configure these network parameters on the CK61:
• Network name (SSID)
Chapter 2 — Connecting and Configuring the CK61
"Configuring Security On the
42.
"Configuring the CK61 With
21.
35