Intermec CK61 User Manual page 59

CK61 Handheld Computer User's Manual With Windows CE
7 Save your settings.
Configuring WPA Security With Funk Security
Use these procedures to set WPA-802.1x, WPA2-802.1x, WPAPSK, or
WPA2-PSK security on your CK61 with Funk security.
To configure WPA-802.1x or WPA2-802.1x with Funk security
1 Make sure you have configured the communications and radio
parameters on your CK61.
2 Make sure you have selected Funk as your security choice.
3 Open Intermec Settings.
4 Choose Communications > 802.11 Radio > Funk Security >
Profile.
5 For Association, choose WPA or WPA2 and tap OK. Encryption
automatically defaults to TKIP if you are using WPA. Encryption
automatically defaults to AES if you are using WPA2.
6 For 802.1x, choose TTLS, PEAP, EAP-FAST, or TLS and press
Enter.
If you choose TTLS or PEAP:
a For Prompt for Credentials, choose Enter credentials now.
Note: You can use Prompt for credentials to troubleshoot your
connection to the network if you have problems.
b Select User name and type your user name.
c Select User Password and type a user password.
d For Validate Server Certificate, choose Yes.
Note: You must have the date on the CK61 set correctly when
you enable Validate Server Certificate.
If you choose TLS:
a Load a user and root certificate on your CK61. For help,
"Loading a Certificate" on page
Chapter 2 — Connecting and Configuring the CK61
59.
47