Intermec CK61 User Manual page 64

Chapter 2 — Connecting and Configuring the CK61
52
3 For Association, choose WPA.
4 For Pre-Shared Key field, enter the passphrase as ASCII. The
passphrase must be 8 to 63 characters and match the passphrase
on the access point.
5 Tap OK.
Configuring WPA2-PSK Security With Profile Wizard
1 In the Profile Wizard, select the Security page.
2 For 802.1x Security, choose None.
3 For Association, choose WPA2.
4 For Encryption, choose TKIP or AES.
5 For Pre-Shared Key field, enter the passphrase as ASCII (12345).
6 Tap OK.
Configuring PEAP Security With Profile Wizard
Protected EAP (PEAP) performs secure authentication against
Windows domains and directory services. It is comparable to EAP-
TTLS, though not as flexible.
To configure PEAP security
1 In the Profile Wizard, select the Security page.
2 For 802.1x Security, choose PEAP.
3 For Association, choose Open, WPA, WPA2, or Network EAP.
4 For Encryption, choose TKIP or AES if you selected WPA2 for
association, or WEP or CKIP if you selected Network EAP for
association.
5 For Username, type a unique username for this protocol.
6 In the Password field, type a unique password for this protocol.
7 Select Prompt for password to have the user enter this password
each time to access the protocol, or select Use following password
to use the protocol without entering a password each time you use
the CK61.
8 Tap Get Certificates to obtain or import server certificates. For
help with certificates, see
CK61 Handheld Computer User's Manual With Windows CE
"Loading a Certificate" on page 59.