Configuring To Communicate With A Wireless Scanner - Intermec CK61 User Manual

Configuring to Communicate With a Wireless Scanner

CK61 Handheld Computer User's Manual With Windows CE
Use the table below to understand the settings you see in the
Bluetooth menu in Intermec Settings.
Bluetooth Settings
Setting Description
Power Set and view whether the Bluetooth radio is on or off.
Discoverable Allows other Bluetooth devices to be able to discover the
computer during a device discovery.
Connectable Allows other Bluetooth devices to connect to your
computer.
Class of Device Determines how the device appears to other devices
during discovery.
IBT Displays the Intermec Bluetooth Library version.
Radio Displays the Bluetooth Radio Hardware version.
Device Address Device Address Displays the Bluetooth address of your
computer.
This section explains how to configure the computer to communicate
with Bluetooth wireless scanners. The computer ships with a
Bluetooth association label attached to the left side. Scan the
association label to quickly connect the computer to the Bluetooth
wireless scanner, such as the SF51 or SR61.
Note: If for some reason the Bluetooth association label does not
work, you can follow the procedure for configuring the computer
from Intermec Settings at the end of this section.
To configure Bluetooth communications on the CK61
1 Select the Windows icon > Control Panel > the Intermec
Settings icon.
2 Select Communications > Bluetooth.
3 If you want to allow incoming connections from wireless scanners,
you must enable these two parameters:
• Discoverable
Chapter 2 — Connecting and Configuring the CK61
25