Accessories - Intermec CK61 User Manual

Appendix A — Specifications

Accessories

98
You can use the following accessories with the CK61. To order these
accessories, contact your local Intermec representative.
AC4 Quad Battery Charger
Use the quad battery charger to charge up to four CK61 battery packs,
and provides power and Ethernet connections to each CK61.
AD3 Ethernet Multidock
Use the AD3 Ethernet Multidock to hold up to four CK61s with a
batteries installed. The multidock charges the batteries, provides
power to the CK61s, provides one Ethernet connector, and provides a
serial port for each inserted CK60.
AD5 Single Dock
Use the AD5 Single Dock to hold a CK61 with its battery installed.
The single dock charges the battery, provides power to the CK61, an
Ethernet connector, a USB port, an ActiveSync USB port, and a serial
port for the inserted CK61.
AD6 Single Dock with Modem
Use the vehicle dock to hold and charge the CK61 while using it on a
vehicle.
CK61 Holster and Belt
Use the holster and belt to carry your CK61. The holster and belt
support either right- or left-handed use and you can use it to carry a
CK61 with or without a handle. You can only use this with a CK61
that has either the 1D linear imager or the 2D imager.
CK61 Power Adapter, USB Adapter, and Snap-On Adapters
Provides power to all of the docks and chargers.
CK61 Mobile Computer User's Manual With Windows CE