Improving The Performance Of The Area Imager; Using The Secure Digital Card - Intermec CK61 User Manual

Chapter 1 — Using the CK61 Mobile Computer

Improving the Performance of the Area Imager

Using the Secure Digital Card

16
If you experience problems scanning a bar code with the 2D imager,
try following some of these tips to improve the performance of your
imager.
• Keep your hand as steady as possible while scanning a label.
• Position the imager as close to the bar code as possible while still
being able to capture the entire bar code.
• Enable only the bar codes that you need to use every day.
• Choose a Predefined mode in Intermec Settings:
a Tap Start > Settings > the System tab > Intermec Settings.
b Tap Data Collection > Internal Scanner > Imager Settings >
Predefined Modes and then select one of these options:
Predefined Mode
1D
1D and 2D Standard
1D and 2D Bright
Environment
1D and 2D Reflective
Surface
Custom
The CK61 uses a secure digital (SD) card to increase file storage and
install software. The SD card slot is located above the scanner window
behind the stylus holder . Remove the two screws securing the stylus
holder to reach the SD card.
CK61 Mobile Computer User's Manual With Windows CE
Select if you Are Scanning:
Only 1D labels
All types of bar code labels.
In high ambient light, such as outdoors
in the sunshine.
Glossy labels.
In conditions that require customized
settings. For more information about
these settings, commands, and
parameters, see the Intermec Computer
Command Reference Manual available
from the Intermec web site at
www.intermec.com.