Activating The Umts Phone - Intermec CN50 User Manual

Activating the UMTS Phone

CN50 Mobile Computer for Windows Mobile 6.1 User's Manual
2 Dial 1 when prompted to complete the process.
This will activate the voice service on the CN50 and program the
phone number into the cell phone.
3 A popup box will state when the programming is successful. When
you close the popup box, the phone will reset.
Activating the Data Service
Use the following procedures to activate data service for Verizon.
1 Tap Start > Settings > Connections > Connection icon.
2 Tap Manage existing connections.
3 Select the InternetPPP #777 and choose Edit.
4 Confirm that the Connection name is correct and then tap Next.
5 In the Enter the Number to dial box, enter #777 and tap Next.
6 Enter your username: <10_digit_#>@vzw3g.com.
Where <10_digit_#> is your actual 10 digit phone number. For
example, 8005551212@vzw3g.com. To determine your phone
number, go to the phone application and tap Menu > Options.
7 Enter the password: vzw (case-sensitive).
8 Tap Finish.
You can test the data service by navigating to a web site using
Internet Explorer.
You use a SIM card to activate the UMTS/HSPA phone on the CN50.
You can purchase the SIM card from your network provider. You insert
the SIM card in the battery cavity on the back of the CN50.
To install the SIM card:
^
1
Press to turn off the CN50.
2 Disconnect the handstrap from the top of the CN50.
3 Push forward on the battery release tab until the battery releases,
and then lift the battery away from the CN50.
Chapter 2 — Connecting and Configuring the CN50
59