Intermec CN50 User Manual page 57

For windows mobile 6.1
Hide thumbs Also See for CN50:
Table of Contents

Advertisement

CN50 Mobile Computer for Windows Mobile 6.1 User's Manual
Configuring WPA Security With Funk Security
Use these procedures to set WPA-802.1x, WPA2-802.1x, WPA-PSK, or
WPA2-PSK security on your CN50 with Funk security.
1 Make sure the communications and radio parameters on your
CN50 are configured.
2 Make sure Funk is selected as your security choice.
3 Start Intermec Settings.
4 Choose Communications > 802.11 Radio > Funk Security.
5 Select the profile you want to configure.
6 For Association, choose WPA or WPA2. Encryption
automatically defaults to TKIP or AES, respectively.
7 For 8021x, choose TTLS, PEAP, EAP-FAST, or TLS.
8 If you choose TTLS or PEAP:
a For Prompt for Credentials, choose Enter credentials now.
Note: You can use Prompt for Credentials to troubleshoot your
network connection.
b Enter a User Name and User Password.
c For Validate Server Certificate, choose Yes.
Note: The correct date must be set on your CN50 when you enable
Validate Server Certificate.
9 If you choose TLS:
a Load a user and root certificate on your CN50. For help, see
"Loading a Certificate" on page
b Enter a User Name and Subject Name.
c For Validate Server Certificate, choose Yes.
d (Optional) To increase your level of security, enter a Server 1
Common name and a Server 2 Common name.
Chapter 2 — Connecting and Configuring the CN50
53.
43

Advertisement

Table of Contents
loading

Table of Contents