CN50 Mobile Computer for Windows Mobile 6.1 User's Manual
Turning a Network Connection on or off
Use the following procedure to turn a network connection on or off.
1 Tap the iConnect icon (
screen.
2 Choose Enable and then choose a network connection from the
list. A check mark next to the connection type indicates that the
connection is enabled.
Configuring or Changing Wireless Security Profile
Settings
Use the following procedure to configure or change wireless security
profile settings.
1 Tap the iConnect icon (
screen.
2 Choose Tools > Wireless Settings. The Profile Wizard appears.
3 Choose a profile from the Profile list and change settings as needed.
For more information, see
page
42.
Configuring or Changing Wireless or Ethernet Network
Settings
Use the following procedure to configure or change wireless or
Ethernet network settings.
1 Tap the iConnect icon (
screen.
2 Do one of the following:
a Choose Tools > Wireless IP Settings.
a Choose Tools > Ethernet IP Settings.
3 Change settings as needed and click ok.
A dialog box appears that shows the current settings for the
wireless or Ethernet network adapter.
Chapter 2 — Connecting and Configuring the CN50
) in the lower right corner of the Today
) in the lower right corner of the Today
"Selecting a Funk Security Profile" on
) in the lower right corner of the Today
39