Selecting A Funk Security Profile - Intermec CN50 User Manual

Chapter 2 — Connecting and Configuring the CN50
42
support for LEAP and TTLS and configuration for up to four
profiles.
• To use Funk security, you need to select a profile. For help, see the
next section, "Choosing Between Microsoft and Funk Security."
• If you are primarily using the CN50 to connect to WiFi hotspots,
you may want to use Microsoft security.
To use Microsoft security, you need to select it as your security
choice. For help, see
Choice" on page

Selecting a Funk Security Profile

You can define up to four profiles for Funk security. Different profiles
let your CN50 communicate in different networks without having to
change all of your security settings. For example, you may want to set
up one profile for the manufacturing floor and one for the warehouse.
By default, the active profile is Profile 1.
Note: You can also use the Profile Wizard to configure most wireless
security settings. To start the Profile Wizard, tap the iConnect icon in
the lower right corner of the Today screen and select Tools > Wireless
Settings.
Selecting a Funk Security Profile
Use the following procedure to select a Funk security profile.
1 Start Intermec Settings.
2 Choose Communications > 802.11 Radio > Funk Security.
3 Choose a profile. A list of configurable settings appears.
4 (Optional) In the Profile Label text box, enter a meaningful name
for your profile.
5 Configure your security settings. For help, see the next sections.
6 Repeat Steps 3 through 5 for each profile you want to define.
7 Set an active profile by choosing it in the Active Profile list.
8 Save your settings.
CN50 Mobile Computer for Windows Mobile 6.1 User's Manual
"Selecting Microsoft as Your Security
46.