Connecting To A Bluetooth Scanner - Intermec CN50 User Manual

CN50 Mobile Computer for Windows Mobile 6.1 User's Manual
2 Tap the Turn on Bluetooth check box.
3 (Optional) To make the CN50 visible to other Bluetooth devices,
tap Make this device visible to other devices.
4 Tap OK.
The Bluetooth radio maintains its state through a warm or cold
boot and maintains virtual COM ports. But, if you clean boot your
CN50 you need to recreate pairings to devices.

Connecting to a Bluetooth Scanner

You can connect to an Intermec Bluetooth scanner, such as the SF51
or SR61, by using the Wireless Scanning enabler.
To use the Wireless Scanning enabler:
1 Tap Start > Settings > System tab > Wireless Scanning.
Chapter 2 — Connecting and Configuring the CN50
35