Cleaning The Cn50 - Intermec CN50 User Manual

Cleaning the CN50

CN50 Mobile Computer for Windows Mobile 6.1 User's Manual
Chapter 4 — Troubleshooting and Maintaining the CN50
5 When prompted, tap the screen to set up the CN50.
6 Follow the instructions to calibrate the screen.
To keep the CN50 in good working order, you may need to clean the
imager window, color camera window, and the touch screen. Clean the
windows and the touch screen as often as needed for the environment
in which you are using the CN50. To clean the CN50, use a solution of
one part ammonia and three parts water.
There are no user-serviceable parts inside the CN50. Opening the
CN50 will void the warranty and may cause damage to the internal
components.
To clean the image window, camera window, and touch screen:
1 Press the Power button to suspend the CN50.
2 Dip a clean cloth towel in the ammonia solution and wring out the
excess.
3 Wipe off the imager window, camera lens, and flash area. Do not
allow any abrasive material to touch these surfaces.
4 Wipe dry.
81