Activating The Umts Radio - Intermec CN50 User Manual

Chapter 2 — Connecting and Configuring the CN50

Activating the UMTS Radio

36
After you complete the activation process, the settings you enter are
permanently stored in the CDMA module. Changing the OS or SSPB
loads will not affect any of the settings or activation parameters
stored in the WAN modem.
To start the Activation Wizard
1 Tap Start > Phone from the Today screen.
2 In the Phone application, tap Menu > Activation Wizard from
the bottom of the screen.
You use a SIM card to activate the UMTS/HSPA phone on the CN50.
You can purchase the SIM card from your network provider. You
insert the SIM card in the battery cavity on the back of the CN50.
To install the SIM card
^
1
Press to turn off the CN50.
2 Disconnect the handstrap from the top of the CN50.
3 Push forward on the battery release tab until the battery releases,
and then lift the battery away from the CN50.
4 Swing the card access door clockwise to expose the SIM card and
microSD card slots.
CN50 Mobile Computer User's Manual