Chapter 2 — Connecting and Configuring the CN50
Activating the CDMA Phone
56
2 In the Wireless Manager, tap Phone. The phone turns on.
3 Tap Menu > Phone Settings to configure the phone. For help, see
"Activating the CDMA
4 Tap Done to close the Wireless Manager.
The CDMA WWAN radio module is configured at the factory. To
activate your CDMA CN50 device, you need to contact the carrier you
have chosen and set up accounts for each device. Use the following
table to view the carriers that Intermec currently supports. If your
carrier is not listed in the table, please contact Intermec product
support to see if it is now supported.
Currently Supported Carriers
Country
United States
The carrier will require the Mobile Equipment Identifier (MEID) to
start the activation process. You can find the MEID:
•
on a label located in the upper right corner of the battery
compartment.
•
on the outside of the CN50 shipping box.
CN50 Mobile Computer for Windows Mobile 6.1 User's Manual
Phone.".
Carrier
Sprint & Verizon