Connecting The Cn50 Using Bluetooth Communications - Intermec CN50 User Manual

Chapter 2 — Connecting and Configuring the CN50

Connecting the CN50 Using Bluetooth Communications

34
4 From the Authentication list, choose either Open, Shared, WPA,
WPA-PSK, WPA2, or WPA-PSK.
• If you choose Open or Shared, Data Encryption is
automatically set to WEP and the key is automatically provided.
• If you choose WPA, Data Encryption is automatically set to
TKIP.
• If you choose WPA2, Data Encryption should be set to AES.
• If you choose WPA-PSK, Data Encryption is automatically set
to TKIP and you need to enter a Network key.
• If you choose WPA2-PSK, Data Encryption should be set to
AES and you need to enter a Network key.
5 Tap Next.
6 For EAP type, select either PEAP or Smart Card or Certificate
from the list and tap Finish. You return to the Configure Wireless
Networks page.
7 Tap Connect. The CN50 prompts you to enter this network
information:
• User name
• Password
8 Tap OK. Your device connects to the network.
9 Make sure that your CN50 is talking to the network and that the
network can see your CN50. If you are connected to the wireless
network you will see a connected icon (
you will see the name of your network next to Wi-Fi in the Wireless
Manager.
You CN50 is Bluetooth™-enabled, which lets you connect to other
Bluetooth devices, such as printers.
You need to turn on the Bluetooth radio before you can discover and
connect to other Bluetooth devices. By default, the radio is turned off.
To turn on the Bluetooth radio:
1 Tap Start > Settings > Connections tab > Bluetooth > Mode tab.
CN50 Mobile Computer for Windows Mobile 6.1 User's Manual
) in navigation bar and