CN50 Mobile Computer for Windows Mobile 6.1 User's Manual
2 Shut down the CN50 by going to Start > Programs > Shut Down.
For more information, see
79.
3 If necessary, disconnect the handstrap from the top of the CN50.
4 Push forward on the battery release tab until the battery releases,
and then lift it away from the CN50.
5 Insert the bottom of a fully charged battery into the CN50, and
press down on the top until it clicks into place.
6 If necessary, replace the handstrap.
Chapter 1 — Using the CN50
"Warm Booting the CN50" on page
5