Intermec CN50 User Manual page 61

CN50 Mobile Computer for Windows Mobile 6.1 User's Manual
With Microsoft as your security choice, you can configure:
• WPA
• 802.1x
Static WEP
•
Selecting Microsoft Security
Use the following procedure to select Microsoft security.
1 Start Intermec Settings. For help, see
page 28.
2 Choose Communications > 802.11 Radio > Security Choice.
3 From the Security Choice list, select Microsoft Security. An alert
box appears telling you that you must save your settings and warm
boot the CN50 for the new security choice to take effect.
4 Choose Yes. The CN50 resets and starts with Microsoft Security as
the Security Choice.
Configuring WPA Security With Microsoft Security
Use these procedures to set WPA-802.1x and WPA-PSK security on
your CN50 with Microsoft security
1 Make sure the communications and radio parameters on your
CN50 are configured.
2 Start Intermec Settings.
3 Choose Communications > 802.11 Radio > Microsoft Security.
4 For Infrastructure Mode, choose Infrastructure.
5 For Network Authentication, choose WPA. Data Encryption
automatically defaults to TKIP.
6 For 802.1x Authentication, choose either MD5, TLS, or PEAP.
7 If you choose TLS:
a Choose Properties > Run App. The Auth. Settings dialog box
appears.
b Choose Select.
Chapter 2 — Connecting and Configuring the CN50
"Configuring the CN50" on
47