Configuring The Cn50; Managing The Cn50 With Smartsystems Foundation - Intermec CN50 User Manual

Chapter 2 — Connecting and Configuring the CN50

Configuring the CN50

Managing the CN50 With SmartSystems Foundation

28
You can configure many parameters on the CN50 such as the bar code
symbologies it decodes or the network settings. These characteristics
are controlled by configuration parameters. The values you set for
these configuration parameters determine how the CN50 operates.
There are several ways to configure the CN50:
• Directly on the CN50 using Intermec Settings. This allows you to
change only the settings on that computer. For more information,
see "Using Intermec Settings Directly On the CN50" on page
29.
• You can use the ScanNGo utility, which is part of SmartSystems™
Foundation, to quickly provide the CN50 with the minimal
information necessary to connect to a secure network. For more
information, see the next section
SmartSystems Foundation."
• You can use a third party device management product that
supports the CN50, such as the Microsoft System Center Mobile
Device Manager. For more information, visit the Microsoft website
at http://msdn.microsoft.com/en-us/default.aspx.
• You can use Imager Configuration Bar codes to enable or disable
symbologies, reset to factory defaults, and set predefined imager
modes. For more information, see
Codes" on page
SmartSystems Foundation is a software platform that lets you manage
all of your SmartSystems-enabled devices, including the CN50,
simultaneously from a central server. The SmartSystems console
displays all SmartSystems-enabled computers and peripherals in your
network.
Through the Console, you can:
• drag-and-drop configuration bundles, operating system updates,
and firmware upgrades to multiple computers.
• create a "golden" device configuration to use when updating other
computers.
CN50 Mobile Computer for Windows Mobile 6.1 User's Manual
"Managing the CN50 With
"Imager Configuration Bar
105.