Activating The Cdma Phone - Intermec CN3, CN3e User Manual

Activating the CDMA Phone

CN3 Series Mobile Computer User's Manual for Windows Mobile 5.0
You can use the Wireless Manager to enable and disable Bluetooth,
Wi-Fi, and the phone if it is built into your CN3.
To turn on the phone using the wireless manager
1 Tap Start > Settings > the Connections tab > Wireless Manager.
2 In the Wireless Manager, tap Phone. The phone turns on.
3 Tap Menu > Phone Settings to configure the phone. For help, see
the next procedure, "Activating the CDMA Phone."
4 Tap Done to close the Wireless Manager.
The CDMA WAN radio module is installed at the factory. To activate
your CDMA CN3 device, you need to contact the carrier you have
chosen and set up accounts for each device. Use the following table to
view the carriers that Intermec currently supports. If your carrier is
not listed in the table, please contact Intermec product support to see
if it is now supported.
Chapter 2 — Connecting and Configuring the CN3
49