Intermec CN50 User Manual page 84

Chapter 3 — Developing and Installing Applications
70
• the SmartSystems bundles you want to install. The SmartSystems
bundle contains the Image Update package file. These
SmartSystems bundles are available from the Intermec web site at
www.intermec.com/. Go to Support > Downloads.
To update the CN50 using SmartSystems Foundation:
1 On your desktop PC, open the SmartSystems Foundation console.
2 Make sure the SmartSystems Foundation console and the
computer are on the same subnet.
3 Make sure the computer is in a charge dock or communications
dock, or that device power management is disabled.
4 Download the SmartSystems bundle to your PC.
5 Double-click the .exe file on your PC. An InstallShield application
starts.
6 From the SmartSystems console, locate the bundle(s) to install.
7 Drag the application to each computer you want to update or to a
group of computers in a folder. The SmartSystems console installs
the update on your computers.
8 After the download is complete, your CN50 begins the update
process and automatically performs a cold boot.
The CN50 then boots into a special Update Loader mode where the
computer has no connections and is completely unusable. This
process can take anywhere from 30 seconds to 15 minutes
depending on the update.
Note: The SmartSystems console indicates that your CN50 is offline,
by displaying a red stop sign symbol, until the CN50 reboots and
reconnects to the system.
9 After the update is complete, the CN50 cold boots again. When a
confirmation dialog box appears requesting user input, dismiss it.
CN50 Mobile Computer for Windows Mobile 6.1 User's Manual