Copying A Measure-Copy (Edit 3) - Roland KR-770 Owner's Manual

5.Editing Recorded Performances
The indication in the display window corresponds to the note values shown below:
Display Timing
12 Half Note (1/2) a
14 Quarter Note (1/4) :
1.6 Quarter Note Triplet (1/6) i
18 Eighth Note (1/8) PY
1.12 Eighth Note Triplet (1/12) mM
1.16 Sixteenth Note (1/16) ?)
1.24 Sixteenth Note Triplet (1/24) 7)
1.32 Thirty-second Note (1/32) 3
Select "1.4" (Quarter Note).
IL
If you wish to cancel the operation at this point, press the [Function] button, and the but-
ton's indicator will stop blinking.
9, Pressing the [Rec] button will complete the Quantize operation.
The [Function] indicator will then go out.
Copying a Measure—Copy (Edit 3)
You can copy and move performance data contained in a designated measure to another
measure on the same track. This is very convenient when you want to repeat the same
phrase one or more times.
When you use this function, all tracks are copied.
Ex.: Makes two copies of measures six to ten at the end of the song
ee ee ee ee Fs) s 6- <| ee ne eee ee
Rhythm Whole ARES Hp Lower Upper -
6 OCT es
Reset Stop
JIC UC)
ro
os
1. Press the [Function] button (the indicator should begin blinking).
2. Press the Song [A] and [¥] buttons until "Ed.3" appears in the display window.
Eds
3. Press the [Rhythm] button.
4. Use the [Fwd] and [Bwd] buttons to find the number of the measure from which you
wish to start copying.
At this time, the display reads "End" when the end of the song is reached.
* Selecting "End" tor the first bar to be copied makes it be not in active.
Choose "6."
5. Press the [Whole] button.
6. Use the [Fwd] and [Bwd] buttons to choose the number of measures to copy, count-
ing from the measure where Copy begins.
Since we will copy five measures, from six through ten, choose "5."
44