Use A Rhythm From Disk A O Oec Ta Dp Ot Eu Rite An - Roland AT90 Owner's Manual

Use a rhythm from disk
The AT-90 contains 53 types of built-in rhythms, and additional rhythms are provid-
ed on the music style disk included. Here's how to select a rhythms from disk.
SST ee m
aaa -
EIE A SR
| |
Rhythm
1. Insert the music style disk into the disk drive.
Be sure that you insert the disk in the correct direction with the label facing
upwards.
2. Press the Disk 1 or Disk 2 button (indicator lights).
3. Press a Rhythm Select button to select a rhythm.
Polka
"138
While the rhythm is being read into memory, the Disk button indicator will blink.
(A short time will be required for the rhythm to be read.)
When reading has been completed, the Disk button indicator will light, and the
selected rhythm will be available to play. Then follow the usual procedure (>p.23,
25) to play the rhythm or automatic accompaniment.
* Immediately after the power is turned on, even if the included disk is not inserted
in the disk drive, you can press the Disk 1 button to play the same rhythm as
Hawaiian on the included disk, or the Disk 2 button to play the same rhythm as
Polka on the included disk. (Refer to the separate sheet.)
* If a large amount of music data exists in the internal memory, the following mes-
sage will appear, and it will not be possible to transfer rhythm data from disk.
If it is ok to erase the music data in memory, press the Rec button. If you do not
wish to erase the data, press the Reset button to cancel the operation, and save the
data to disk. (>p.43)
* While recording, it will not be possible to transfer rhythm data from disk.
29