Replacing Supplies And Maintenance; Replacing The Toner Cartridges - Sharp MX-B381 Maintenance & Safety Manual Maintenance & Safety Manual Aintenance & Safety Manual

REPLACING SUPPLIES AND
MAINTENANCE
This section explains the procedures for replacing supplies such as toner and
staple cartridges and routine maintenance.

Replacing the toner cartridges

Be sure to replace the toner cartridge when the message "Change the toner
cartridge." appears.
In copy mode
Ready to scan for copy.
(Prepare a new one.)
When this message appears, replace the toner cartridge.
If you continue to use the toner cartridge without replacing it,
the message below will appear.
When this message appears, printing will not be possible until
the toner cartridge is replaced.
Change the toner cartridge.
To view the approximate amount of toner remaining, continually touch the
[COPY] key during printing or when the machine is idle. The percentage of
toner remaining will appear in the display while the key is touched. When the
percentage falls to "25-0%", obtain a new toner cartridge and keep it ready for
replacement.
OK
11