Configuring A Subzone; D14049.04 - TANDBERG VCS Administrator's Manual

Grey Headline (continued)
Subzones
To configure a subzone:
•
VCS Configuration > Local Zone > Subzones
You will be taken to the Subzones page.
Click on the subzone you wish to configure.
You will be taken to the Edit Subzone
•
xConfiguration Zones LocalZone SubZon
Name
Enter the name you wish to assign to the subzone. You will refer
to this name when creating Links and Pipes.
Subnet 1
Enter the subnet IP Address and Prefix, This will define the
range of IP addresses that will belong to the first subnet in this
subzone.
Address range =
This shows the range of IP addresses that will be allocated to
this subzone, based on the combination of the subnet address
and prefix length that have been configured.
Subnet 2 - 5
Use these fields to define up to 4 further subnets for this
Subzone.
Bandwidth
See Applying Bandwidth Limitations to Subzones
description of these fields.
Save
Click here to save your changes.
Overview and
Introduction Getting Started
Status

D14049.04

JULY 2008
.
page.
e
for a
System VCS
Configuration Configuration

Configuring a Subzone

Zones and Call Bandwidth
Neighbors Processing Control
138
TANDBERG VIDEO COMMUNICATIONS SERVER
Firewall
Applications Maintenance
Traversal
ADMINISTRATOR GUIDE
Appendices