Ptz Camera Position After A Session Closes; Ptz And Motion Search; Sharing Live Sessions From One Unit; Table 2-2 Ptz Camera Position After A Session Closes - Honeywell Rapid Eye Operator's Manual

PTZ Camera Position After a Session Closes

PTZ and Motion Search

Sharing Live Sessions from One Unit

Document 800-07767 Rev A
02/11
After use, a PTZ camera can be returned automatically to a set direction and zoom (see
2-2). A Multi SA makes the setting in a Maintenance session, on the Video tab with
Table
PTZ selected. Make the selection in the When Live/Response ends section.
Table 2-2 PTZ Camera Position After a Session Closes
Session Ends Behavior
Stay put The camera remains in the last position used by the operator. If it
is panning, it keeps on panning. If it is not moving, it stays put. The
stay put behavior makes the Return to Auto-iris and Return to
Auto-focus options available.
Go to preset1 The camera returns to preset 1, configured using a Multi-Media
unit.
a
Start tour1 Some camera models can keep moving when not in use by an
operator.
a
A PTZ tour differs from site tours (see
Motion search is not effective on video recorded as a PTZ camera is panning, tilting,
zooming or touring. If you plan to use motion search on a PTZ camera, use Stay put or a
preset for the close of session option. Video recorded while a PTZ camera is immobile can
be searched for motion (see
used to find out when a PTZ camera was moved, if that camera should be staying put.
Limitations on Viewing Live Video in many Live Sessions
When live video is monitored, no more than 8 live video streams from the same group of
cameras can be viewed at a time. The groups of cameras are defined in
For example:
• Two operators are viewing live video from 3 cameras in group C (3 cameras × 2
operators = 6 live streams). Therefore, a third operator can view live video using only
2 of the cameras in group C.
• Eight operators, each running a live session, are viewing the same live camera. A
ninth operator cannot view live video using a camera from the same group.
Rapid Eye Remote View Operator Guide
Watching Site
Motion, page 61). A motion search can also be
Searching for
Tours, page 115).
Table 2-3.
47