Table of Contents
Advertisement
Chery QQ Service Manual
Put the bolt with expand nut into the lo
lighting fitting with tapping screw;
Connect lamp seat harness, install the c
Close the luggage compartment lid.
6. Removal and installation of license plate lamp protective
board and license plate lamp
Removal:
1. Open the luggage com
2
. Loose the nut which to fix lock core.
3. Loose two tapping screw on the protective board then take them down.
4. Remove the tapping screw from licens
Removal of
license plate lamp/protective board assembly
Remove four fixing screws on the license plate lam
Remove two fixing screws on the p
Installation:
Connect harness connector;
arpet.
partment, remove trim
e plate lamp.
rotective board.
- 46 -
cation hole on
the car body, then fix the
board.
p.
Advertisement
Table of Contents
Troubleshooting
