Advertisement
CONNECTING THE SYSTEM
Audio Connections
Audio connections should be made as shown in the diagram below. ADAT optical cables must be
connected from the ADAT Out port of the WaveCenter/PCI card to the ADAT In port of the 328XD, and vice
versa. 75Ω Coaxial digital S/PDIF cables must also be connected from the WaveCenter/PCI S/PDIF output
to the 328XD S/PDIF input and vice versa.
In this configuration, the ADAT connections allow digital transfer of either direct outputs from the 328XD's
input channels 1-8 to the WaveCenter/PCI card, or the 328XD's 8 Group outputs. The S/PDIF output
from the console can be assigned to either the Mix output, 1 of 3 stereo auxiliary outputs (Aux 1/2, Aux
3/4 or FX-1/2), pairs of Group outputs or the Control Room output. The 328XD S/PDIF Input can be
configured as a digital Stereo Input or as a digital 2-Track Return.
Other Connections
You may also wish to connect the 328XD to the WaveCenter/PCI card via MIDI to allow MIDI automation /
System Exclusive dumps from the 328XD to be recorded and played back from your PC.
If you wish to connect the 328XD to the WaveCenter/PCI card via MIDI, the following connections must be
made:
2 2 2 2
Soundcraft 328XD and Frontier Design WaveCeneter/PCI
Advertisement
