Audio Connectors - SoundCraft M16 User Manual

Audio Connectors

2
2=Hot(+)
3
3=Cold(-)
Use for Balanced Mic Inputs
(For unbalanced use, connect pin 1 to 3)
3-pin XLR Male Plug
(seen from soldering side)
2
2=Hot(+)
3
3=Cold(-)
Use for Main output
(For unbalanced use, leave pin 3 unconnected)
3-pin XLR Line Socket
(seen from soldering side)
Tip
Sleeve
Ring
Strain Clamp
Sleeve=Ground/Screen
Use for Headphone, Stereo Return
1/4" Stereo (TRS) Jack Plug
Tip
Sleeve
Strain Clamp
Sleeve=Ground/Screen
Use for Mono Line In, Mono 1/4"Jack Plugs
1/4" Mono (TS) Jack Plug
Tip
Sleeve
Ring
Strain Clamp
Sleeve=Ground/Screen
Use for Pre-Gain Channel Inserts
1/4" Stereo (TRS) Jack Plug
NANO SERIES - M16 / M24
USER GUIDE
1
1=Ground/Screen
1
1=Ground/Screen
Ring=Right Signal
Tip=Left Signal
Tip=Signal
Ring=Return Signal
Tip=Send Signal
Sleeve=Ground/Screen
Tip
Ring=Return Signal
Ring
Sleeve
Y-Stereo lead for insert Connection
(To be used when the processor does not employ a
single jack connection for the In/Out Connections)
Ring=Return Signal (Connected together)
Sleeve=Ground/Screen
Tip=Signal
Sleeve=Ground/Screen
'Tapped' Connection Direct Output Lead
(Enables the Insert to be used as a Direct Output
while maintaining the channel signal flow)
®
To Processor Input
Tip=Send Signal
To Channel Insert
To Processor Output
To Channel Insert
To Tape or FX Input
21