Setting The "Sound Setting" Function - Konica Minolta bizhub C200 User Manual

Additional copy operations
3
Select the setting for the desired length of time that the notification screen is displayed.
– Select "3 second", "10 second", "60 second" or "No Limit". If "No Limit" is selected, the Reception
Completed screen is displayed until [OK] is touched.
– The factory default setting is "3 second".
4
Touch [OK], and then touch [OK] in the next screen that appears.
The Basic screen appears again.
3.5.6

Setting the "Sound Setting" function

The volume can be selected for the tone produced when a touch panel button is touched.
1
Display the Accessibility Settings screen.
– For details on displaying the Accessibility Settings screen, refer to
Settings screen" on page
2
Touch [Sound Setting].
The Sound Setting screen appears.
3
Select the volume.
– The factory default setting is "Normal".
– The volume of the tone produced when a control panel key is pressed or when an alarm is sounded
can also be changed from the Utility mode. For details, refer to
settings" on page
4
Touch [OK], and then touch [OK] in the next screen that appears.
The Basic screen appears again.
C200
3-10.
11-10.
"Displaying the Accessibility
"Specifying User Management
3
3-14