High Availability Volume - 3Com 4510G Configuration Manual

Features
ACL Overview
IPv4 ACL
IPv6 ACL
ACL Application for
Packet Filtering

High Availability Volume

Table 2-7 Features in the High Availability volume
Features
Smart Link
Monitor Link
ACLs are sets of rules (or sets of permit or deny statements) that decide
what packets can pass and what should be rejected based on matching
criteria. This document provides the introduction of IPv4 ACL and IPv6
ACL.
This document describes:
Creating a Time Range
Configuring a Basic IPv4 ACL
Configuring an Advanced IPv4 ACL
Configuring an Ethernet Frame Header ACL
Copying an IPv4 ACL
This document describes:
Creating a Time Range
Configuring a Basic IPv6 ACL
Configuring an Advanced IPv6 ACL
Copying an IPv6 ACL
You can apply an ACL to the inbound or outbound direction of an
ethernet interface or VLAN interface to filter received or sent packets
such as Ethernet frames, IPv4 packets, and IPv6 packets. This document
describes:
Filtering Ethernet Frames
Filtering IPv4 Packets
Filtering IPv6 Packets
Configuring Packet Filtering Statistics Function
Smart Link is a solution for active-standby link redundancy backup and
rapid transition in dual-uplink networking. This document describes:
Smart Link Overview
Configuring a Smart Link Device
Configuring an Associated Device
Monitor link is a port collaboration function used to enable a device to be
aware of the up/down state change of the ports on an indirectly connected
link. This document describes:
Monitor Link Overview
Configuring Monitor Link
2-9
Description
Description