Configure Auto-Switch Of Cameras; Configure Channel-Zero Encoding - HIKVISION DS-8132HQHI-K8 User Manual

Configure Auto-Switch of Cameras

Purpose:
You can set the auto-switch of cameras to play in different display modes.
Go to System > Live View > General.
Set the video output interface, live view mode and dwell time.
 Video Output Interface: Select the video output interface.
 Live View Mode: Select the display mode for live view, e.g., 2*2, 1*5, etc.
 Dwell Time: The time in seconds to dwell between switching of cameras when enabling auto-
switch. The range is from 5s to 300s.
Go to View to set the view layout.
Click OK to save the settings.

Configure Channel-zero Encoding

Purpose:
You can enable the channel-zero encoding when you need to get a remote view of many channels
in real time from web browser or CMS (Client Management System) software, in order to decrease
the bandwidth requirement without affecting the image quality.
Go to System > Live View > General.
Select the video output interface to Channel-Zero.
Go to System > Live View > Channel-Zero.
Check the checkbox to enable the channel-zero.
Configure the Frame Rate, Max. Bitrate Mode and Max. Bitrate. The higher frame
rate and bitrate settings result in the higher requirement of bandwidth.
Network Video Recorder User Manual
Live View- Channel-Zero Encoding
74