Configuring More Settings - HIKVISION DS-7104HQHI-K1 User Manual

2) Click Apply button to save the settings.
3) You can click Refresh button to get the latest status of the port mapping.

12.2.6 Configuring More Settings

Step 1 Go to Menu > Configuration > Network > More Settings.
Step 2 Configure the remote alarm host, server port, HTTP port, multicast, and RTSP port.
 Alarm Host IP/Port: With a remote alarm host configured, the device will send the alarm
event or exception message to the host when an alarm is triggered. The remote alarm
host must have the CMS (Client Management System) software installed.
The Alarm Host IP refers to the IP address of the remote PC on which the CMS (Client
Management System) software (e.g., iVMS-4200) is installed, and the Alarm Host Port
must be the same as the alarm monitoring port configured in the software (default port is
7200).
 Multicast IP: The multicast can be configured to realize live view for more than the
maximum number of cameras through network. A multicast address spans the Class-D IP
range of 224.0.0.0 to 239.255.255.255. It is recommended to use the IP address ranging
from 239.252.0.0 to 239.255.255.255.
Digital Video Recorder User Manual
Figure 12-12 External Port Settings Dialog Box
Figure 12-13 UPnP™ Settings Finished-Manual
Figure 12-14 More Settings Interface
171