Checking Hdd Status - HIKVISION DS-7208HTI-K2 User Manual

DS-720xHTI-Kx DVR User Manual
Only the sub-stream recorded files can be uploaded to the cloud storage.
Configure the event triggered recording schedule and enable the corresponding event type.
9. (Optional) Click Copy to copy the cloud storage settings to other cameras. You can also click the
Analog/IP Camera checkbox to select all cameras.
10. Click OK to return to the cloud storage interface, and click Apply to finish the settings.

12.6 Checking HDD Status

Purpose
You can check the status of the installed HDDs on the DVR so as to take immediate check and
maintenance in case of HDD failure.
Checking HDD Status in HDD Information Interface
1. Go to Menu > System Configuration > HDD > HDD Information.
2. Check the status of each HDD displayed on the list, as shown below.
If the HDD status is
initialize the HDD before use. If the HDD initialization fails, replace it with a new one.
Figure 12-16 Copy to Interface
Figure 12-17 View HDD Status (1)
Normal Sleeping
or , it is working normally. If the status is
Uninitialized Abnormal
or ,
157