User Manual of DS-7300HI/7300HFI/8100HDI-ST Series DVR
3. Check the PPPoE checkbox to enable this feature.
4. Enter User Name, Password, and Confirm Password for PPPoE access.
Note:
The User Name and Password should be assigned by your ISP.
5. Click the Apply button to save and exit the interface.
6. After successful settings, the system will ask you to reboot the device to enable the settings, and the PPPoE
dial-up will be automatically connected after reboot.
You can go to Menu > Maintenance > System Info > Network interface to view the status of PPPoE connection.
Please refer to Chapter 12.1Viewing System Information for PPPoE status.
9.2.2 Configuring DDNS
Purpose:
If your DVR is set to use PPPoE as its default network connection, you may set Dynamic DNS (DDNS) to be used
for network access.
Figure 9.2 PPPoE Settings Interface
Figure 9.3 PPPoE Settings Interface
142