Table of Contents
Advertisement
8.1 Setting Motion Detection
Step 1 Enter Motion Detection interface of Camera Management.
Menu> Camera> Motion
Step 2 Select a camera you want to set up motion detection.
Step 3 Check
checkbox to enable motion detection.
Step 4 Set detection area and sensitivity.
Use the mouse to draw detection area(s) or click Full Screen to set the detection area to be
the full screen and drag the sensitivity bar to set sensitivity.
Step 5 Click
to set alarm response actions.
ATM Digital Video Recorder User Manual
Chapter 8 Alarm Settings
Figure 8-1 Motion Detection Setup Interface
Figure 8-2 Set Detection Area and Sensitivity
119
Advertisement
Table of Contents
