Print Head Problems - Oce 5250 User Manual

During the registration adjustment, the following message displays:

Print head problems

To prevent the print heads from drying out, make sure the carriage is in the
purge station before turning off the printer. (When the print heads are in the
purge station (not in use), they are properly capped.
Print head problems
Problem
Solutions
148 Océ 5250 user manual
AUTO-ADJUSTMENT
PLEASE WAIT
The carriage is moving but no ink appears on media
Remove the ink tanks then the printheads, check that the film is
removed from the print heads and put back the printheads and ink
tanks.
Ink tanks may be empty, replace empty tanks
Clean the print heads using the
ing the print heads' on page 133)
Check that the cutter unit is correctly fitted, so that the printer
caps the print heads properly in the purge station (see 'Replacing
the cutter unit' on page 132).
menu (see 'Clean-
CLEAN HEAD