Oce 5250 User Manual page 50

To align the cut sheet media
Adjust the media so that its edges flush with the vertical and horizontal
1
reference marks.
Raise the green lever to fix the media (see figure 34).
2
[36] Aligning the cut sheet media
Close the dust cover. The displays reads:
3
Set the media mode to 'cut sheet' (see chapter , 'Selecting a media mode' on
4
page 42).
Press 'enter'. The printer detects and loads the media. When the media aligns
5
correctly, the display reads 'ready'.
If the media is not correctly aligned the control panel display reads:
Note:
Follow the instructions in the previous section, to align the media
Note:
correctly.
50 Océ 5250 user manual
Horizontal reference mark
NO MEDIA
PRESS ENTER TO INSTALL MEDIA
MEDIA MISALIGNED
REALIGN MEDIA AND PRESS ENTER
Vertical reference mark