Using the transparency mode
This option determines what happens when two or more colours intersect at the
same point on a print, especially in area fills. This mode applies only to
CalComp, HP-GL, HP-GL/2.
Merge
the default setting.
[45] Transparency mode: 'Merge'
Overlay*
transparent as shown in figure 46.
This mode applies only to HP-GL/2 format, when the filter command is
Note:
set on (default settings).
[46] Transparency mode: 'Overlay'
102
Océ 5250 user manual
all the specified colours blend together as shown in figure 45. This is
only foreground colours are visible except the white one, which is