CalComp step size
To set the CalComp step size
There are seven step sizes measured in dots per inch. Please refer to your
software documentation to choose the appropriate step size. A wrong step size
can affect the scale of your drawing.
Press the 'down' arrow once to enter the menu.
1
Follow the flowchart path to 'step size'.
2
Select the step size.
3
Press 'enter'.
4
Media type
[57] To set the CalComp step size
116
Océ 5250 user manual
Configuration
Data format
Calcomp setup
Step size
100 / 200 / 400 / 500 / 1016 / 2032 / 4064