Oce 5250 User Manual page 139

The printer does not detect any media in the media path. To recover,
No media
load the media, then press the 'Enter' key (see 'Loading roll media' on
page 43).
You have opened the dust cover. If the printer is currently printing,
Cover open
it finishes printing the current band, then stops. To recover, close the dust
cover.
To obtain high print quality, do not open the dust cover during printing.
Note:
(Error 60) One or several print heads are not installed on the
Head missing
carriage. To recover, press the 'Print head' key to move the carriage into
position, then install the print heads (see 'Unpacking and installing the print
head' on page 36). Close the cover.
(Error 61) One or several ink tanks are not installed on the
Tank missing
carriage. To recover, press the 'Enter' key to move the carriage into position,
then a message indicates which ink tanks to install ('Install tank <type>) (see
'Installing the ink tank' on page 39). Close the cover.
(Error 18, 19, 62) The indicated print head is out of order. To
Head error
recover, press the 'Printhead' key to move the carriage into position, then
replace that print head (see 'Unpacking and installing the print head' on
page 36). Close the cover.
(Error 21, 24, 36) A head error has occurred. To recover, press the
Head error
'Enter'.
(Error 20) The indicated print head is not in the right position. To
Wrong head
recover, press the 'Printhead' key to move the carriage into position, then
replace that print head (see 'Unpacking and installing the print head' on
page 36). Close the cover.
(Error 11) The cutter fails to cut the media. To recover, open the
Cutter error
dust cover, then release the green lever to remove the media. Check that the
cutter unit is installed and in good working order and not damaged, (see
'Replacing the cutter unit' on page 132). Close the cover. Press the 'Enter' key
to restart the media loading.
(Errors 1-10, 13-16, 31, 32) The printer cannot correctly detect the
Media error
size of the loaded media. To recover, open the dust cover, and reinstall the
media (see 'Loading roll media' on page 43). Close the cover. Press the 'Enter'
key to restart the media loading.
Troubleshooting 139