Hp-Gl, Hp-Gl/2; Page Advance - Oce 5250 User Manual

HP-GL, HP-GL/2

Page advance

The printer can interpret the SPO command in two ways, depending on the
printer emulation (either a pen printer, or a raster printer):
Page advance = yes
which an spo command signifies an end of print.
Page advance = no
'select pen zero'. It prints all vectors after the SPO command using the current
pen zero.
To set the page advance
Press the 'down' arrow once to enter the menu.
1
Follow the flowchart path to the data format you want (HPGL, HPGL/2).
2
Go to 'page advance'.
3
Set to 'yes' or 'no'.
4
Press 'enter'.
5
Media type
Configuration
[51] To set the page advance
106 Océ 5250 user manual
The printer is compatible with HP-GL print files, in
the printer responds to the HP-GL instruction SPO as
Data format
Hpgl setup Hpgl/2 setup
Page advance
no / yes