Overlay
opaque as shown in figure 47.
[47] Transparency mode: 'Overlay' with white as opaque.
To set the transparency mode
Press the 'down' arrow once to enter the menu.
1
Follow the flowchart path to get the data format (HPGL, HPGL/2,
2
CALCOMP)
Go to 'transparency'.
3
Select 'merge' or 'overlay'.
4
Press 'enter'.
5
Media type
Configuration
[48] To set the transparency mode
Print data formats
only foreground colours are visible. In this case, the white colour is
Data format
Calcomp setup
Hpgl setup
Hpgl/2 setup
Transparency
merge / overlay
103