End Of Message Parameter - Oce 5250 User Manual

End of message parameter

To set the end of message parameter
Press the 'down' arrow once to enter the menu.
1
Follow the flowchart path to 'eom'.
2
Select the value. Values range from 0 to 30 inclusive. The selected value is the
3
decimal equivalent of the byte that indicates the end of the data sequence. It
should be a unique character in the character set used for coding the data.
Press 'enter'
4
Media type
[54] To set the end of message parameter
Print data formats
Configuration
Data format
Calcomp setup
Eom
0 ... 30
113