Autopositioning
With this option, the printer ignores the origin declared in the print file. The
print shifts to the lower right corner of the media. If necessary, the printer
rotates the drawing 90°, to save media and limit clipping.
Auto position applies only with vector files.
Note:
To set autoposition
Press the 'down' arrow once to enter the menu.
1
Follow the flowchart path to get to 'm/s mode'.
2
Select 'autopositioning'.
3
Press 'enter'.
4
68
Océ 5250 user manual
Configuration
Media type
Print manager
Media saver
m/s mode
off / auto positioning / nesting