Banner Messages - Oce 5250 User Manual

Banner messages

A banner message appears on the media, at the end of the print, whenever the
printer detects an error in the course of a print.
When using cut sheet media: at the end of the problem print, the display
reads 'Print pending'. Load a new cut sheet. The printer then prints out the
banner message.
When using roll media: at the end of the print, the printer prints out the
banner message after the cut marks or the actual cut.
The following are possible banner messages:
initRaster Allocation Failure on normal processing
allocation failure at the start of rasterization process during normal processing.
The printer discards the file, and prints nothing.
initRaster Allocation Failure on the fly mode
failure at the start of rasterization during on the fly processing. The printer
discards the file, and prints nothing.
Not enough memory for rasterization in polygon buffer
allocation failure in polygon rasterization. The printer prints out the file until
the error occurrence.
Too many vectors: not enough memory
in vector rasterization during on the fly processing. The printer prints out the
file until the error occurrence.
Solutions
Verify how much memory (RAM) you have on the printer (print out a list of
the configuration settings, (see 'Printing the dump configuration' on
page 81). Expand the size by installing an extra RAM module (see
'Expanding the printer memory' on page 96).
142 Océ 5250 user manual
indicates a memory
indicates a memory allocation
indicates a memory
indicates a memory allocation failure